# Board: Generic ESP32-C3 Board (Generic)
# Definition: definitions/boards/generic-esp32c3/manifest.yaml

esphome:
  name: the-saloon
  friendly_name: the-saloon

api:
  encryption:
    key: "hOwepopyk9l0dnp8M+UBkLfhIIel75DOlYCtwJG8tvI="

ota:
  - platform: esphome

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap:
    ssid: the-saloon Fallback Hotspot
    password: "JrEe6jVLK36I"


esp32:
  board: esp32-s3-devkitc-1
  variant: esp32s3
  flash_size: 16MB
  framework:
    type: esp-idf

psram:
  mode: octal
  speed: 80MHz

logger:

# Backlight
output:
  - platform: ledc
    pin: GPIO38
    frequency: 2000
    id: backlight_output

light:
  - platform: monochromatic
    output: backlight_output
    name: "LCD Backlight"
    restore_mode: ALWAYS_ON
    default_transition_length: 0s

# Display bus (8-bit parallel, declared as an octal "spi")
spi:
  type: octal
  clk_pin: 8
  data_pins:
    - 39
    - 40
    - 41
    - 42
    - number: 45
      ignore_strapping_warning: true
    - number: 46
      ignore_strapping_warning: true
    - 47
    - 48

display:
  - platform: mipi_spi
    model: t-display-s3
    rotation: 270
    update_interval: 5s
    lambda: |-
      it.printf(10, 10, id(roboto), "NAS RAM");
      if (id(nas_ram_free).has_state()) {
        it.printf(10, 60, id(roboto_big), "%.0f MB", id(nas_ram_free).state);
      } else {
        it.printf(10, 60, id(roboto), "waiting...");
      }

font:
  - file: "gfonts://Roboto"
    id: roboto
    size: 24
  - file: "gfonts://Roboto"
    id: roboto_big
    size: 48

# Data from Glances (same as before)
http_request:
  timeout: 5s

sensor:
  - platform: template
    id: nas_ram_free
    name: "NAS RAM libre"
    unit_of_measurement: "MB"
    accuracy_decimals: 0
    state_class: measurement

interval:
  - interval: 60s
    then:
      - http_request.get:
          url: http://192.168.1.19:61208/api/4/mem   # your NAS IP
          capture_response: true
          on_response:
            then:
              - lambda: |-
                  json::parse_json(body, [](JsonObject root) -> bool {
                    id(nas_ram_free).publish_state(root["available"].as<float>() / 1048576.0f);
                    return true;
                  });