# Board: Generic ESP32-C3 Board (Generic)
# Definition: definitions/boards/generic-esp32c3/manifest.yaml

esphome:
  name: the-saloon
  friendly_name: the-saloon

api:
  encryption:
    key: "hOwepopyk9l0dnp8M+UBkLfhIIel75DOlYCtwJG8tvI="

ota:
  - platform: esphome

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap:
    ssid: the-saloon Fallback Hotspot
    password: "JrEe6jVLK36I"


esp32:
  board: esp32-s3-devkitc-1
  variant: esp32s3
  flash_size: 16MB
  framework:
    type: esp-idf

psram:
  mode: octal
  speed: 80MHz

logger:

# Backlight
output:
  - platform: ledc
    pin: GPIO38
    frequency: 2000
    id: backlight_output

light:
  - platform: monochromatic
    output: backlight_output
    name: "LCD Backlight"
    restore_mode: ALWAYS_ON
    default_transition_length: 0s

# Display bus (8-bit parallel, declared as an octal "spi")
spi:
  type: octal
  clk_pin: 8
  data_pins:
    - 39
    - 40
    - 41
    - 42
    - number: 45
      ignore_strapping_warning: true
    - number: 46
      ignore_strapping_warning: true
    - 47
    - 48

display:
  - platform: mipi_spi
    model: t-display-s3
    rotation: 270
    update_interval: 5s
    lambda: |-
      // RAM
      if (id(nas_ram_free).has_state())
        it.printf(10, 10, id(roboto), "%.1f GB", id(nas_ram_free).state);

      // Disk bar
      if (id(nas_disk_percent).has_state()) {
        float pct = id(nas_disk_percent).state;
        int x = 10, y = 135, w = 300, h = 22;
        Color c = pct > 90 ? Color(255, 0, 0) : (pct > 75 ? Color(255, 165, 0) : Color(0, 200, 0));
        it.filled_rectangle(x + 2, y + 2, (int)((w - 4) * pct / 100.0f), h - 4, c);
        it.printf(10, 105, id(roboto), "%.0f%%", pct);
      }

font:
  - file: "gfonts://Roboto"
    id: roboto
    size: 24
  - file: "gfonts://Roboto"
    id: roboto_big
    size: 48

# Data from Glances (same as before)
http_request:
  timeout: 5s

sensor:
  - platform: template
    id: nas_ram_free
    name: "NAS RAM libre"
    unit_of_measurement: "GB"
    accuracy_decimals: 0
    state_class: measurement
  - platform: template
    id: nas_disk_percent
    name: "NAS disque utilisé"
    unit_of_measurement: "%"
    accuracy_decimals: 1
    state_class: measurement

interval:
  - interval: 60s
    then:
      - http_request.get:
          url: http://192.168.1.19:61208/api/4/mem   # your NAS IP
          capture_response: true
          on_response:
            then:
              - lambda: |-
                  json::parse_json(body, [](JsonObject root) -> bool {
                    id(nas_ram_free).publish_state(root["available"].as<float>() / 1073741824.0f);
                    return true;
                  });
      - http_request.get:
          url: http://192.168.1.19:61208/api/4/fs   # your NAS IP
          capture_response: true
          on_response:
            then:
              - lambda: |-
                  JsonDocument doc;
                  if (deserializeJson(doc, body)) return;
                  for (JsonObject fs : doc.as<JsonArray>()) {
                    if (strcmp(fs["mnt_point"] | "", "/etc/hosts") == 0) {   // your mount point
                      id(nas_disk_percent).publish_state(fs["percent"].as<float>());
                      break;
                    }
                  }